Do you know the precautions for installation of intelligent vortex flowmeter

1. The flow direction of the fluid in the pipeline must be consistent with the flow direction mark on the flowmeter, and the pipeline must be filled with liquid.

The axis of the instrument should be consistent with the axis of the pipeline;

2. This meter is a speed meter. To ensure measurement accuracy, there must be a long enough straight pipe section upstream and downstream of the flowmeter.

The inner diameter of the diameter section should not be less than the nominal diameter of the instrument;

3. The flow regulating valve should not be arranged upstream of the flow meter, and there should be enough straight pipe sections before and after;

4. Because piezoelectric elements are more sensitive to shock and vibration, although countermeasures are adopted in the design of the instrument,

However, the instrument should still be installed in a place where mechanical vibration and impact are negligibly small,

Or adopt shock absorption measures on the front and rear pipelines of the instrument;

5. The instrument installation should avoid large-capacity transformers and motors, and avoid power source lines for wiring;

6. In order to waterproof and prevent cables from being injured, it is recommended to use wire tubes or conduits outside the cables;

7. When the meter is used in a leaky place, it is recommended to adopt certain measures to prevent exposure to sunlight and rain;

Want to know more about precession vortex flowmeter, thermal gas mass flowmeter, electromagnetic flowmeter, Kaifeng vortex flowmeter,

For more knowledge of turbine flow meters and ultrasonic flow meters, please pay attention to the official website of Hollysys Industrial Control Instruments.